10 Solaris 7980g User Guide
4. Connect the USB cable to the USB port on the left side of the scanner, and then
connect the interface cable to the auxiliary scanner.
Button Functionality
Note: The 7980GEL does not support Button Functionality.
There are two buttons on the front of the device. The following is a brief description
of the settings for the buttons.
Beeper Volume Adjustment
When Volume Adjustment is set to On, pressing the Sound button repeatedly
scrolls through the volume settings for the scanner’s beeper. When set to Off, the
Sound button does not scroll through these settings. Default = Volume Adjustment
On.
Beeper Volume
Beeper Frequency