4 Solaris 7980g User Guide
4. Slide the back cover on and screw the back cover to the device. Connect the
interface cable to the computer, and then plug the power supply into the outlet.
5. Turn the terminal/computer power back on. The scanner beeps.
6. Verify the scanner operation by scanning a bar code from the Sample Symbols
on page 233. The scanner beeps once.
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with
a USA keyboard. A carriage return (CR) suffix is added to bar code data.
Keyboard Wedge Connection:
2
3
1
4
To Next Page
Loading...
