OPERATOR MANUAL // SECTION 3: TROUBLESHOOTING AND
MAINTENANCE
HONEYWELL 24
3.4 Detector Repair
Return the defective module to the factory for repair service.
THERE ARE NO USER SERVICEABLE PARTS IN A
DETECTOR
MODULE.
If the Model SS4-A/-A2 Module must be shipped back to the factory for
repair, it MUST be packed in static protective material. If not available, the
Module should be carefully wrapped with aluminum foil. An RMA (Return
Material Authorization) is required for all returns to the factory. Contact
Honeywell Analytics Customer Service or your Distributor for an RMA
number before shipping a unit back to the factory.
To Next Page
Loading...
