Honeywell Touchpoint Plus - National and International Certificates of Compliance

Certification
MAN0996_Iss 1_02/16 Touchpoint Plus
Pt. No. 3011M5044_EN 58 User Guide
11.2 National and International Certificates of Compliance
The Touchpoint Plus Process Control Equipment holds the following National and International Certificates and
Certification Codes:
Title Standards Certificates
Hazardous Locations
(Non-Incendive)
Class 1, Division 2, Groups A,B,C,D, Temp. Code T4
ISA 12.12.01-2013
CSA C22.2 No. 213-M1987
UL File E477917
Ordinary Locations /
Electrical Safety
UL/IEC/EN 61010-1, UL 508
CSA C22.2 No.61010-1/No.142
UL File E466771
UL File E470577
Ingression protection IP65 and NEMA 4X —
EMC/RFI EMC Directive (EN 50270:2015) —
Battery Pack
UN 38.3 (IEC 62133), UL 2054, UL 60950-1
CSA C22.2 No.60950-1-07
UL File MH60522
Performance ISA 12.13.01 and CSA C22.2 No.152 UL File E466771
Copies of the certificates are available on request.
Note 1: OEMs are responsible for ensuring that their systems are certified in accordance with these tables and any 3
rd
-
party requirements.
WARNING
Ambient temperature: Dependent on components fitted, check individual rating plates.
AVERTISSEMENT
Température ambiante : elle dépend des composants assemblés, vérifier individuellement les plages de
température