Honeywell VFD CORE

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
141 63-4528—04
• Setting 4 Stall prevention by auto accel./decel. (limited by 01-12 to 01-21): if the acceleration/deceleration is in a reasonable
range, it will accelerate/decelerate in accordance with the setting of Pr.01-12~01-19. If the accel./decel. time is too short, the
actual accel./decel. time will be greater than the setting of accel./decel. time.
01 – 37 Time Unit for Acceleration/Deceleration and S Curve
Factory Setting: 0
Settings 0: Unit 0.01 second
1: Unit 0.1 second
M33620
FREQUENCY
FREQUENCY
FREQUENCY
TIME
ACCEL. TIME DECEL. TIME
ACCEL./DECEL. TIME
01-12, 01-14
01-16, 01-18
01-13, 01-15
01-17, 01-19
01-07
01-00
MIN.
MAX.
2
1