Honeywell VFD CORE - Page 162

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
63-4528—04 162
• When the source of frequency command comes from the external terminal, if Lv or Fault occurs at this time, the frequency
command of the external terminal will be saved in this parameter.
02 - 51 Display the Frequency Command Memory of External Terminal
Factory Setting: Read Only
Settings Read Only
02 - 52 Mix Active by Internal or External
Factory Setting: 0
Settings 0~65535
02 - 53 Internal Mix Active Value
Factory Setting: 0
Setings 0~65535