Honeywell VFD CORE

CHAPTER 12: DESCRIPTION OF PARAMETER SETTINGS
63-4528—04 196
82 Output Phase Lose A V V (able to auto-reset) V
83 Output Phase Lose B V V (able to auto-reset) V
84 Output Phase Lose C V V (able to auto-reset) V
99 CPU Trap V V V
101 Guarding T-out V Not detectable Not detectable
102 Heartbeat T-out V Not detectable Not detectable
103 SYNC T-out V Not detectable Not detectable
104 CAN Bus Off V Not detectable Not detectable
105 CAN Idx exceed V Not detectable Not detectable
106 CAN Address set V Not detectable Not detectable
107 CAN FRAM fail V Not detectable Not detectable
Table 4. Error detection under Normal mode, Fire mode and Bypass function at Fire mode (V means detectable)
Code Error name Normal
mode
Fire Mode Enable bypass
function