To Next PageTo Next PageWhat to do if my Horton C2150 fails to unlock (Fail Safe)?
If your Horton Controller fails to unlock in a Fail Safe configuration, the suggested solution is to check for any mechanical binding. Additionally, inspect the AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SAFE autolocks.
What to do if my Horton Controller fails to unlock (Fail Secure)?
If your Horton Controller fails to unlock in a Fail Secure configuration, the suggested solution is to check for mechanical binding. Also, you should check the AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SECURE autolocks.
What to do if my Horton C2150 Controller fails to lock (Fail Safe)?
If your Horton Controller fails to lock in a Fail Safe configuration, the suggested solution is to check for mechanical binding. You should also check the AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SAFE autolocks.
What to do if my Horton C2150 Controller fails to lock (Fail Secure)?
If your Horton Controller experiences a lock failure in a Fail Secure setup, check for any mechanical binding. Also, check items under AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SECURE autolocks.
What to do if my Horton Garage Door Opener unlock fails in fail-safe mode?
If your Horton Garage Door Opener unlock fails in fail-safe mode, check for mechanical binding. Also, check items under AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SAFE autolocks.
What to do if my Horton Garage Door Opener lock fails in fail-safe mode?
If your Horton Garage Door Opener lock fails in fail-safe mode, check for mechanical binding. Also, check items under AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SAFE autolocks.
What to do if my Horton Garage Door Opener unlock fails in fail-secure mode?
If your Horton Garage Door Opener unlock fails in fail-secure mode, check for mechanical binding. Also, check items under AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SECURE autolocks.
What to do if my Horton Garage Door Opener lock fails in fail-secure mode?
If your Horton Garage Door Opener lock fails in fail-secure mode, check for mechanical binding. Also, check items under AUTOLOCK TEST POINTS and AUTOLOCK FUNCTIONS FOR FAIL SECURE autolocks.
General| Brand | Horton |
|---|---|
| Model | C2150 |
| Category | Controller |
| Language | English |
Provides installation guidance for various electric slide door operator series.
Details initial wiring steps and power supply connections for installation.
Emphasizes proper grounding and safety requirements during installation.
Guides through the automatic learn cycle for door setup.
Verifies the door's movement and operation after initialization.
Step-by-step guide to modify adjustable parameters.
Lists adjustable parameters, codes, and factory preset values.
Sets jumpers for different door operation modes.
Details setup for fail secure and fail safe autolock systems.
Configures lock parameters based on traffic mode (day/night, 1-way/2-way).
Explains autolock operation, error codes, and test points.
Procedure to test microswitch functionality using the display.
Instructions for mounting and wiring the partial open switch.
Guides through the automatic learn cycle for belt drive setup.
Steps to select motor type and identify lock codes.
Verifies the door's movement and operation for belt drives.
Step-by-step guide to modify adjustable parameters for belt drives.
Lists adjustable parameters, codes, and factory preset values for belt drives.
Sets jumpers for different door operation modes for belt drives.
Details setup for fail secure and fail safe autolock systems on belt drives.
Configures lock parameters for belt drives based on traffic mode.
Explains autolock operation, error codes, and test points for belt drives.
Explains various error codes related to encoder failure and loss of pulses.
Guides through testing encoder power, pulses, and connections.
Details mounting and connecting the C3984 power failure unit.
Explains setting the PF parameter and performing manual tests.
Addresses problems with display not lighting or door not moving.
Guides on resolving repeatedly blowing fuses and abnormal displays.
Step-by-step test for linear drive functionality using the control.
Step-by-step test for belt drive functionality using the control.
Lists various codes displayed by the C2150 control and their meanings.
Explains cycle codes and how to view the history of door activation.
Provides useful shortcuts for self-cycle, learning strokes, and parameter access.
Guides on testing motor resistance to prevent control damage.
Details the terminals on CN2 and their corresponding functions.
Shows wiring for interior and exterior actuator sensors.
Diagrams for various switches, sensors, and key switch assemblies.
Illustrates typical wiring for Optex photo electric systems.
Details header mount options and amplifier wiring for beams.
