HP 280 G4 - Computer Setup-Configuration

Table 5-2 Computer Setup—Security (continued)
Option Description
Intel Software Guard
Extensions (SGX)
Lets you congure SGX. Default is S/W Controlled.
TPM Device Lets you set the Trusted Platform Module as Available or Hidden. If set to Hidden, the TPM device is not
visible to the operating system. If changed to Available, the TPM device becomes visible immediately
without a system restart. Default is Available.
TPM State Lets you enable or disable the TPM. The TPM State setting can change only if you conrm the request via
the Physical Presence Check prompted by BIOS during the next startup. Default is Enabled.
Clear TPM Set to Yes to reset the TPM to an unowned state. After the TPM is cleared, it is also turned o. To
temporarily suspend TPM operations, turn the TPM o instead of clearing it. Default is No.
IMPORTANT: Clearing the TPM resets it to factory defaults and turns it o. You will lose all created keys
and data protected by those keys.
Restore security settings
to factory defaults.
Restores all security settings to factory defaults.
Computer Setup—Conguration
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Table 5-3 Computer Setup—Conguration (for advanced users)
Option Heading
Language Lets you select the language of the menus in F10 Setup and the keyboard layout.
Virtualization
Technology
Lets you enable virtualization technology support. Default is eEnabled.
SATA Emulation Lets you congure SATA to either AHCI mode or RAID mode.
Num Lock State at
Power-On
Let you set the Num Lock state after POST. Default is On.
S4/S5 Wake on LAN Lets you control whether the computer wakes from S4 (hibernation) or S5 (soft o) if a magic packet is
received by the NIC. Default is Disabled.
Device Options Allows you to set:
● Multi-Processor (enable/disable). Default is enabled.
● Hyper-Threading (enable/disable). Default is enabled.
● NIC PXE Option ROM Download (enable/disable). Default is enabled.
Thermal Displays current CPU fan speed in rpm.
UEFI HII Conguration Provides conguration of device-supported UEFI HII (Human Interface Infrastructure).
Computer Setup—Boot Options
NOTE: Support for specic Computer Setup options can vary depending on the hardware conguration.
Computer Setup (F10) utilities 43