EasyManuals Logo
Home>HP>Switch>3100 Series

HP 3100 Series User Manual

HP 3100 Series
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
117
# Associate the MAC address of Laptop 1 with VLAN 100, and associate the MAC address of
Laptop 2 with VLAN 200.
[DeviceA] mac-vlan mac-address 000d-88f8-4e71 vlan 100
[DeviceA] mac-vlan mac-address 0014-222c-aa69 vlan 200
# Configure Laptop 1 and Laptop 2 to access the network through Ethernet 1/0/1. Configure
Ethernet 1/0/1 as a hybrid port that sends packets of VLANs 100 and 200 untagged, and enable
the MAC-based VLAN feature on it.
[DeviceA] interface ethernet 1/0/1
[DeviceA-Ethernet1/0/1] port link-type hybrid
[DeviceA-Ethernet1/0/1] port hybrid vlan 100 200 untagged
Please wait... Done.
[DeviceA-Ethernet1/0/1] mac-vlan enable
[DeviceA-Ethernet1/0/1] quit
# To enable the laptops to access Server 1 and Server 2, configure the uplink port Ethernet
1/0/2 as a trunk port, and assign it to VLANs 100 and 200.
[DeviceA] interface ethernet 1/0/2
[DeviceA-Ethernet1/0/2] port link-type trunk
[DeviceA-Ethernet1/0/2] port trunk permit vlan 100 200
[DeviceA-Ethernet1/0/2] quit
2. Configure Device B:
# Create VLANs 100 and 200. Assign Ethernet 1/0/13 to VLAN 100, and assign Ethernet 1/0/14
to VLAN 200.
<DeviceB> system-view
[DeviceB] vlan 100
[DeviceB-vlan100] port ethernet 1/0/13
[DeviceB-vlan100] quit
[DeviceB] vlan 200
[DeviceB-vlan200] port ethernet 1/0/14
[DeviceB-vlan200] quit
# Configure Ethernet 1/0/3 and Ethernet 1/0/4 as trunk ports, and assign them to VLANs 100
and 200.
[DeviceB] interface ethernet 1/0/3
[DeviceB-Ethernet1/0/3] port link-type trunk
[DeviceB-Ethernet1/0/3] port trunk permit vlan 100 200
[DeviceB-Ethernet1/0/3] quit
[DeviceB] interface ethernet 1/0/4
[DeviceB-Ethernet1/0/4] port link-type trunk
[DeviceB-Ethernet1/0/4] port trunk permit vlan 100 200
[DeviceB-Ethernet1/0/4] quit
3. Configure Device C as you configure Device A.
Verifying the configuration
1. Laptop 1 can access Server 1 only, and Laptop 2 can access Server 2 only.
2. On Device A and Device C, you can see that VLAN 100 is associated with the MAC address of
Laptop 1, and VLAN 200 is associated with the MAC address of Laptop 2.
[DeviceA] display mac-vlan all
The following MAC VLAN addresses exist:
S:Static D:Dynamic
MAC ADDR MASK VLAN ID PRIO STATE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3100 Series and is the answer not in the manual?

HP 3100 Series Specifications

General IconGeneral
BrandHP
Model3100 Series
CategorySwitch
LanguageEnglish

Related product manuals