HP 3100 Series User Manual

200
Configure MVRP and set the MVRP registration mode to normal, so that Device A, Device B, Device
C, and Device D can register and deregister dynamic and static VLANs and keep identical VLAN
configuration for each MSTI.
When the network is stable, set the MVRP registration mode to fixed on the port that connecting
Device B to Device A, so that the dynamic VLANs on Device B are not de-registered.
Figure 69 Network diagram
Configuration procedure
Configuring Device A
# Enter MST region view.
<DeviceA> system-view
[DeviceA] stp region-configuration
# Configure the MST region name, VLAN-to-instance mappings, and revision level.
[DeviceA-mst-region] region-name example
[DeviceA-mst-region] instance 1 vlan 10
[DeviceA-mst-region] instance 2 vlan 20
[DeviceA-mst-region] revision-level 0
# Manually activate the MST region configuration.
[DeviceA-mst-region] active region-configuration
[DeviceA-mst-region] quit
G
E
1
/
0
/
1
GE
1
/
0
/
1
GE
1
/
0
/
1
G
E
1
/
0
/
1

HP 3100 Series Specifications

General

Brand	HP
Model	3100 Series
Category	Switch
Language	English