EasyManuals Logo
Home>HP>Switch>3100 Series

HP 3100 Series User Manual

HP 3100 Series
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
161
# Create a QoS policy named qinq, associate traffic class A10 with traffic behavior P100,
and associate traffic class A20 with traffic behavior P200.
[PE1] qos policy qinq
[PE1-qospolicy-qinq] classifier A10 behavior P100
[PE1-qospolicy-qinq] classifier A20 behavior P200
[PE1-qospolicy-qinq] quit
# Apply QoS policy qinq to the incoming traffic globally.
[PE1] qos apply policy qinq global inbound
# Enable selective QinQ on the port.
[PE1] interface ethernet 1/0/1
[PE1-Ethernet1/0/1] qinq enable downlink
{ Configure Ethernet 1/0/2:
# Configure Ethernet 1/0/2 as a trunk port and assign it to VLAN 100 and VLAN 200.
[PE1] interface ethernet 1/0/2
[PE1-Ethernet1/0/2] port link-type trunk
[PE1-Ethernet1/0/2] port trunk permit vlan 100 200
# Set the TPID in the outer VLAN tags to 0x8200.
[PE1-Ethernet1/0/2] quit
[PE1] qinq ethernet-type 8200
2. Configure PE 2:
{ Configure Ethernet 1/0/1:
# Configure Ethernet 1/0/1 as a hybrid port to permit frames of VLAN 100 and VLAN 200 to
pass through untagged.
[PE2] interface ethernet 1/0/1
[PE2-Ethernet1/0/1] port link-type hybrid
[PE2-Ethernet1/0/1] port hybrid vlan 100 200 untagged
[PE2-Ethernet1/0/1] quit
# Create class A10 and configure the class to match frames from Site 2 with CVLAN 10.
[PE2] traffic classifier A10
[PE2-classifier-A10] if-match customer-vlan-id 10
[PE2-classifier-A10] quit
# Create traffic behavior P100 and add the action of inserting outer VLAN tag 100.
[PE2] traffic behavior P100
[PE2-behavior-P100] nest top-most vlan-id 100
[PE2-behavior-P100] quit
# Create class A20 and configure the class to match frames with CVLAN 20. Create traffic
behavior P200 and add the action of inserting outer VLAN tag 200.
[PE2] traffic classifier A20
[PE2-classifier-A20] if-match customer-vlan-id 20
[PE2-classifier-A20] quit
[PE2] traffic behavior P200
[PE2-behavior-P200] nest top-most vlan-id 200
[PE2-behavior-P200] quit
# Create a QoS policy named qinq, associate traffic class A10 with traffic behavior P100,
and associate traffic class A20 with traffic behavior P200.
[PE2] qos policy qinq
[PE2-qospolicy-qinq] classifier A10 behavior P100
[PE2-qospolicy-qinq] classifier A20 behavior P200

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3100 Series and is the answer not in the manual?

HP 3100 Series Specifications

General IconGeneral
BrandHP
Model3100 Series
CategorySwitch
LanguageEnglish

Related product manuals