HP 3100 Series

To Next Page

To Previous Page

207

Registration Type : Normal

Local VLANs :

1(default),

The output shows that:

{ Port Ethernet 1/0/1 has learned VLAN 1 and dynamic VLAN 20 created on Device B through

MVRP.

{ Port Ethernet1/0/2 has learned only VLAN 1 through MVRP.

2. Change the registration mode and verify the configuration:

Set the MVRP registration mode to fixed on Ethernet 1/0/3 of Device B, so that the dynamic

VLANs that Device B learns in VLAN 1 are not de-registered.

# Set the MVRP registration mode to fixed on Ethernet 1/0/3.

[DeviceB] interface ethernet 1/0/3

[DeviceB-Ethernet1/0/3] mvrp registration fixed

[DeviceB-Ethernet1/0/3] quit

# Display the local MVRP VLAN information on Ethernet 1/0/3.

[DeviceB] display mvrp running-status interface ethernet 1/0/3

-------[MVRP Global Info]-------

Global Status : Enabled

Compliance-GVRP : False

----[Ethernet1/0/3]----

Config Status : Enabled

Running Status : Enabled

Join Timer : 20 (centiseconds)

Leave Timer : 60 (centiseconds)

Periodic Timer : 100 (centiseconds)

LeaveAll Timer : 1000 (centiseconds)

Registration Type : Fixed

Local VLANs :

1(default), 10,

The output shows that the VLAN information on Ethernet 1/0/3 is not changed after you set the

MVRP registration mode to fixed on Ethernet 1/0/3.

# Delete VLAN 10 on Device A.

[DeviceA] undo vlan 10