HP 3100 Series User Manual

73
Table 13 Mappings between the link speed and the path cost
Link speed Port type
Path cost
IEEE 802.1d-1998 IEEE 802.1t
Private
standard
0 N/A 65535 200,000,000 200,000
10 Mbps
Single port
100
2,000,000 2000
Aggregate interface
containing 2 Selected
ports
1,000,000 1800
Aggregate interface
containing 3 Selected
ports
666,666 1600
Aggregate interface
containing 4 Selected
ports
500,000 1400
100 Mbps
Single port
19
200,000 200
Aggregate interface
containing 2 Selected
ports
100,000 180
Aggregate interface
containing 3 Selected
ports
66,666 160
Aggregate interface
containing 4 Selected
ports
50,000 140
1000 Mbps
Single port
4
20,000 20
Aggregate interface
containing 2 Selected
ports
10,000 18
Aggregate interface
containing 3 Selected
ports
6666 16
Aggregate interface
containing 4 Selected
ports
5000 14
10 Gbps
Single port
2
2000 2
Aggregate interface
containing 2 Selected
ports
1000 1
Aggregate interface
containing 3 Selected
ports
666 1
Aggregate interface
containing 4 Selected
ports
500 1
Configuration restrictions and guidelines
• When it calculates path cost for an aggregate interface, IEEE 802.1t takes into account the
number of Selected ports in its aggregation group, but IEEE 802.1d-1998 does not. The

HP 3100 Series Specifications

General

Layer	Layer 2
Jumbo Frame Support	Yes
Switching Capacity	8.8 Gbps
MAC Address Table Size	8000 entries
Management	Web interface, SNMP, CLI
Operating Temperature	0 to 45°C (32 to 113°F)
Operating Humidity	10% to 90% non-condensing
Dimensions	44(H) x 440(W) x 173(D) mm