HP 35s

16-4 Statistics Programs
   If flag 0 is set . . .
  . . . takes the natural log of the X–input.
   Stores that value for the correction routine.
   Prompts for and stores Y.
   If flag 1 is set . . .
  . . . takes the natural log of the Y–input.
  
  
  Accumulates B and R as x,y–data pair in statistics registers.
   Loops for another X, Y pair.
Checksum and length: 9560 46
   Defines the beginning of the "undo" routine.
   Recalls the most recent data pair.
  
  Deletes this pair from the statistical accumulation.
   Loops for another X, Y pair.
Checksum and length: A79F 15
   Defines the start of the output routine
  Calculates the correlation coefficient.
   Stores it in R.
   Displays the correlation coefficient.
  Calculates the coefficient b.
   If flag 1 is set takes the natural antilog of b.
 

   Stores b in B.
   Displays value.
  Calculates coefficient m.
   Stores m in M.
   Displays value.
Checksum and length: 850C 36
   Defines the beginning of the estimation (projection) loop.
Program Lines:
(In RPN mode)
Description