EasyManuals Logo

HP 5500 HI Series User Manual

HP 5500 HI Series
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
171
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication and accounting methods of the default
domain are used for the user.
[SwitchB] domain default enable dm1
4. Enable portal authentication on the interface connecting the host:
# Configure the portal server as needed.
[SwitchB] portal server newpt ip 192.168.0.111 key simple portal port 50100 url
http://192.168.0.111:8080/portal
# Enable portal authentication on the interface connecting the host.
[SwitchB] interface vlan-interface 10
[SwitchB–Vlan-interface10] portal server newpt method layer3
# Specify the source IP address of outgoing portal packets as 9.9.1.1, the virtual IP address of
VRRP group 1.
[SwitchA–Vlan-interface10] portal nas-ip 9.9.1.1
5. Configure portal stateful failover:
# Assign interface VLAN-interface 10 to portal group 1.
[SwitchB–Vlan-interface10] portal backup-group 1
[SwitchB–Vlan-interface10] quit
# Set the ID of the device in the stateful failover mode to 2.
[SwitchB] nas device-id 2
# Specify the source IP address of outgoing RADIUS packets as 192.168.0.1, the virtual IP
address of VRRP group 2.
[SwitchB] radius nas-backup-ip 192.168.0.1
Make sure you have added the access device with IP address 192.168.0.1 on the RADIUS server.
6. Configure stateful failure:
# Configure the VLAN for stateful failover as VLAN 8.
[SwitchB] dhbk vlan 8
# Enable stateful failover and configure it to support the symmetric path.
[SwitchB] dhbk enable backup-type symmetric-path
Verifying the configuration
# After user Host logs in through Switch A, display the user authentication information by using the
display portal user command on Switch A and Switch B.
[SwitchA] display portal user all
Index:3
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode: primary
VPN instance:NONE
MAC IP Vlan Interface
---------------------------------------------------------------------
000d-88f8-0eac 9.9.1.2 10 Vlan-interface10
Total 1 user(s) matched, 1 listed.
[SwitchB] display portal user all
Index:2

Table of Contents

Other manuals for HP 5500 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5500 HI Series and is the answer not in the manual?

HP 5500 HI Series Specifications

General IconGeneral
BrandHP
Model5500 HI Series
CategorySwitch
LanguageEnglish

Related product manuals