21
Task Command Remarks
Display the user group configuration
information.
display user-group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Configuring RADIUS schemes
A RADIUS scheme specifies the RADIUS servers that the switch can cooperate with and defines a set of
parameters that the switch uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters include the IP addresses of the servers, the shared keys, and the RADIUS server type.
RADIUS scheme configuration task list
Task Remarks
Creating a RADIUS scheme Required
Specifying the RADIUS authentication/authorization servers Required
Specifying the RADIUS accounting servers and the relevant parameters Optional
Specifying the shared keys for secure RADIUS communication Optional
Specifying the VPN to which the servers belong Optional
Setting the username format and traffic statistics units Optional
Setting the supported RADIUS server type Optional
Setting the maximum number of RADIUS request transmission attempts Optional
Setting the status of RADIUS servers Optional
Specifying the source IP address for outgoing RADIUS packets Optional
Specifying a backup source IP address for outgoing RADIUS packets Optional
Setting timers for controlling communication with RADIUS servers Optional
Configuring RADIUS accounting-on Optional
Configuring the IP address of the security policy server Optional
Configuring interpretation of RADIUS class attribute as CAR parameters Optional
Enabling the trap function for RADIUS Optional
Enabling the RADIUS client service Optional
Setting the DSCP value for RADIUS packets Optional
Displaying and maintaining RADIUS Optional
Creating a RADIUS scheme
Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter
RADIUS scheme view:
To Next Page
Loading...
Need help?
General
