HP 5500 HI Series User Manual

15
No. Sub-attribute Descri
p
tion
206 Output-Interval-Gigawords Result of bytes output within an accounting interval divided by 4G bytes.
207 Backup-NAS-IP Backup source IP address for sending RADIUS packets.
255 Product_ID Product name.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode (see "Configuring FIPS") and non
-FIPS mode.
AAA configuration considerations and task list
To configure AAA, you must complete these tasks on the NAS:
1. Configure the required AAA schemes.
{ Local authentication—Configure local users and the related attributes, including the usernames
and passwords of the users to be authenticated.
{ Remote authentication—Configure the required RADIUS and HWTACACS schemes. You must
configure user attributes on the servers accordingly.
2. Configure AAA methods for the users’ ISP domains.
{ Authentication method—No authentication (none), local authentication (local), or remote
authentication (scheme)
{ Authorization method—No authorization (none), local authorization (local), or remote
authorization (scheme)
{ Accounting method—No accounting (none), local accounting (local), or remote accounting
(scheme)
Figure 10 AAA configuration diagram
Configure the RADIUS and
HWTACACS schemes
Authorization method
Accounting method
Configure AAA methods
Create an ISP domain
and enter its view
local (the default)
None
scheme
Authentication method
Configure local users and related
attributes
+
+
Local AAA
Remote AAA
No AAA
local (the default)
None
scheme
local (the default)
None
scheme

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English