EasyManuals Logo

HP 5500 HI Series User Manual

HP 5500 HI Series
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
170
6. Configure the stateful failover function:
# Configure the VLAN for stateful failover as VLAN 8.
[SwitchA] dhbk vlan 8
# Enable stateful failover and configure it to support the symmetric path.
[SwitchA] dhbk enable backup-type symmetric-path
Configuring Switch B
1. Configure VRRP:
# Create VRRP group 1, and configure the virtual IP address of the VRRP group 1 as 9.9.1.1.
<SwitchB> system-view
[SwitchB] interface vlan-interface 10
[SwitchB–Vlan-interface10] vrrp vrid 1 virtual-ip 9.9.1.1
# Set the priority of VLAN-interface 10 in VRRP group 1 to 150.
[SwitchB–Vlan-interface10] vrrp vrid 1 priority 150
[SwitchB–Vlan-interface10] quit
# Create VRRP group 2, and configure the virtual IP address of the VRRP group 2 as 192.168.0.1.
[SwitchB] interface vlan-interface 20
[SwitchB–Vlan-interface20] vrrp vrid 2 virtual-ip 192.168.0.1
# Set the priority of VLAN-interface 20 in VRRP group 2 to 150.
[SwitchB–Vlan-interface20] vrrp vrid 2 priority 150
[SwitchB–Vlan-interface20] quit
2. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
[SwitchB] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the IMC server, configure the
RADIUS server type as extended.
[SwitchB-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[SwitchB-radius-rs1] primary authentication 192.168.0.111
[SwitchB-radius-rs1] primary accounting 192.168.0.111
[SwitchB-radius-rs1] key authentication simple expert
[SwitchB-radius-rs1] key accounting simple expert
# Configure the access device to not carry the ISP domain name in the username sent to the
RADIUS server. (Optional, configure the username format as needed.)
[SwitchB-radius-rs1] user-name-format without-domain
[SwitchB-radius-rs1] quit
3. Configure an authentication domain:
# Create ISP domain dm1 and enter its view.
[SwitchB] domain dm1
# Configure AAA methods for the ISP domain.
[SwitchB-isp-dm1] authentication portal radius-scheme rs1
[SwitchB-isp-dm1] authorization portal radius-scheme rs1
[SwitchB-isp-dm1] accounting portal radius-scheme rs1
[SwitchB-isp-dm1] quit

Table of Contents

Other manuals for HP 5500 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5500 HI Series and is the answer not in the manual?

HP 5500 HI Series Specifications

General IconGeneral
BrandHP
Model5500 HI Series
CategorySwitch
LanguageEnglish

Related product manuals