HP 83751A User Manual

I
-
I
-
Marker Keys
This key toggles the marker A mode on and off.
If marker A mode is off when this key is pressed the following things happen:
l The marker A mode is turned on,
l the active marker becomes the active parameter,
l and the d@&nce frequency between this marker and the A Reference
Marker is displayed in the MARKER/SWEEP/STATUS area in the format t4~ rl
-
r-)=<sign><di3it.s><unit.s>, where n is the active marker and r is
the number of the A reference marker.
l The MKR A LED annunciator is turned on,
l and MARKer:MODE is set to DELTA.
l The A reference marker is turned on and cannot be turned off while Marker
A mode is on.
l If no marker was the active marker since the last time (preset_) was
pressed, M2 becomes the default active marker.
If marker A mode is on when this key is pressed, the following things
happen:
l The mode is turned off
l the active marker becomes the active parameter displayed in the
MARKER/SWEEP/STATUS area
l the MKR A LED annunciator is turned off
l and MARKer:MODE is set to FREQuency
Associated SCPI Commands
MARKer[n]:MODE FREquencylDELTa
Same as pressing [[MKR A)
MARKer[n]:DELTa? <nun>, <nun>
Used to query over HP-B
Associated 8350 Commands
SMBI <nl> <n2>
Sets marker A mode to on.
9-8

HP 83751A Specifications

General

Brand	HP
Model	83751A
Category	Blower
Language	English