I
-
I
-
Frequency Keys
All the frequency functions share a common step size (this includes the
frequency of the markers). A step that would move a frequency beyond its
legal range is not taken, allowing you to “retrace your steps” by stepping in
the opposite direction.
The maximum and minimum frequencies are dependent upon the model
number of your sweeper and are documented in the
“SpeciEcations
and
Options” chapter of this manual.
The instrument can only sweep up in frequency, therefore the STOP
frequency cannot be less than the START frequency. If a start frequency is
entered which is greater than the stop frequency, then the stop frequency
becomes equal to the start; if a stop frequency is entered which is less than
the start frequency, then the start becomes equal to the stop.
11-3
-1
To Next Page
Loading...
General