I
-
I
-
Frequency Keys
Icw)
SWEPT
CW
Operates the same as pressing the (FZJ key, except that sweep mode is
turned on, and the 0 to 10 V ramp is available at the SWEEP OUT BNC
connectors on the front and rear panels.
This mode allows power sweep and power slope in CW mode.
Associated SCPI Commands
FREQuency:MODE
SWEep
Sets the instrument to sweep mode.
FREQuency[:CW(FIXed]
:AUTO
ONIOFF
Turns CW/CFcooplng an or
OK
FREQuency:CWlFIXed
<num>[suffix]
Sets
CWto
the desired fiequenq
FREQuency:SHCW
<num>[suffixl
Sets swept
L’W
to desired fiequenq
Associated 8350 Commands
SHCW
<num>[suff
ix1
Turns swept CW on.
11-11
To Next Page
Loading...