Special Functions
17
-
*SECURITY
401 CLEAR This function lets you clear and initialize the entire content of RAM
MEMORY
to all zeros. This clears all of the save/recall registers. The number of
times that memory is cleared and the
RAMS
are set to zeros is set by
482
C:LRMEM
IXilJHT.
After the
RAMS
are cleared, the instrument is set to
preset conditions.
When you press
(GiiF)
SPECIAL
c401)
[Hz/s/ENTER), the following message is
displayed: I: 1
r
mm’?
r..*‘EHTER.
l If you do not want the save/recall registers cleared, press
(ZJ.
The
message
Mwmt-q
Not.
I:: 1
ex
appears briefly and you are returned to the
481
C:LEHR
MEMOR’C
selection.
l
If
do want all of the save/recall registers to be cleared by initializing the
RAMS
to all zeros, press (Hz/s/ENTER).
Associated SCPI Commands
SYSTem:SECurity:CLEar
Sets the
RAMS
to zeros and presets
the instrument.
MEMory:RAM:INITialize[:ALL]
Sets the
RAMS
to
zaros
and presets
the instrument.
15-23
To Next Page
Loading...