56
Procedure
Ste
Command
Remarks
1. Enter system view.
system-view —
2. Enter one or more AUX user interface
views.
user-interface aux
first-number
[ last-number ]
—
3. Specify the none authentication mode.
authentication-mode
none
Required.
By default, users that log in through the
console port are not authenticated.
4. Configuring common settings for
modem login.
—
Optional.
See “Configuring common settings for
modem login (optional).”
When you log in to the device through modems after the configuration, you are prompted to press Enter. A
prompt such as <HP> appears after you press Enter, as shown in Figure 7.
Figure 7 Configuration page
Configuring password authentication for modem login
Prerequisites
You have logged in to the device.
By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
“Configuration requirements.”
To Next Page
Loading...
Need help?
General
