HP A5800 Series User Manual

63
Displaying and maintaining CLI login
Task Command Remarks
Display the source IP address/
interface specified for Telnet
packets.
display telnet client
configuration [ | { begin
| exclude | include }
regular- expression ]
Available in any view.
Display information about the user
interfaces that are being used.
display users [ | { begin
| exclude | include }
regular- expression ]
Available in any view.
Displays information about all user
interfaces that the device supports.
display users all [ |
{ begin | exclude |
include } regular
-expression ]
Available in any view.
Display user interface information.
display user-interface
[ num1 | { aux | vty }
num2 ] [ summary ] [ |
{ begin | exclude |
include } regular-
expression ]
Available in any view.
Release a specified user interface.
free user-interface
{ num1 | { aux | vty }
num2 }
Available in user view.
Multiple users can log in to the system to
simultaneously configure the device. In some
circumstances, when the administrator wants
to make configurations without interruption
from the users that have logged in through
other user interfaces, the administrator can
execute the command to release the
connections established on the specified user
interfaces.
You cannot use this command to release the
connection you are using.
Lock the current user interface. lock
Available in user view.
By default, the current user interface is not
locked.
Send messages to the specified
user interfaces.
send { all | num1 |
{ aux | vty } num2 }
Available in user view.

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English