HP A5800 Series User Manual

62
Ste
p
Command Remarks
Define
shortcut key
for
terminating
tasks
escape-key { default |
character }
Optional
By default, press Ctrl+C to terminate a task.
Configure
flow control
mode
flow-control
{ hardware | none |
software }
Optional
By default, the value is none
Configure
type of
terminal
display
terminal type { ansi |
vt100 }
Optional
By default, the terminal display type is ANSI.
The device supports two types of terminal
display: ANSI and VT100. HP recommends
setting the display type of both the device
and the client to VT100. If the device and the
client use different display types (for
example, hyper terminal or Telnet terminal)
or both are set to ANSI, when the total
number of characters of the edited command
line exceeds 80, an anomaly such as cursor
corruption or abnormal display of the
terminal display may occur on the client.
Configure
user privilege
level for login
users
user privilege level
level
Optional
3 by default.
Set maximum
number of
lines on the
next screen
screen-length
screen-length
Optional
By default, the next screen displays 24 lines
at most.
A value of 0 disables the function.
Set size of the
history
command
buffer
history-command
max-size value
Optional
By default, the buffer saves 10 history
commands at most.
Set idle-
timeout timer
idle-timeout minutes
[ seconds ]
Optional
The default idle-timeout is 10 minutes. The
system automatically terminates the user’s
connection if no information interaction
occurs between the device and the user
within the idle-timeout time.
Setting idle-timeout to 0 disables the timer.

HP A5800 Series Specifications

General

Brand	HP
Model	A5800 Series
Category	Switch
Language	English