EasyManua.ls Logo

HP A7533A - Brocade 4Gb SAN Switch Base - Page 328

HP A7533A - Brocade 4Gb SAN Switch Base
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
326 iSCSI gateway service
3. Write down or copy and paste the FC WWN information for each LUN, which you will need during
the zone creation process.
4. Enter the nsShow command to display the WWN information for the iSCSI virtual initiators:
switch:admin> nsshow
{
Type Pid COS PortName NodeName
TTL(sec)
NL 0120d6; 3;21:00:00:04:cf:e7:74:cf;20:00:00:04:cf:e7:74:cf; na
FC4s: FCP [SEAGATE ST336607FC 0004]
Fabric Port Name: 20:20:00:60:69:e0:01:56
Permanent Port Name: 21:00:00:04:cf:e7:74:cf
Port Index: 32
Share Area: No
Device Shared in Other AD: No
NL 0120d9; 3;21:00:00:04:cf:e7:73:7e;20:00:00:04:cf:e7:73:7e; na
FC4s: FCP [SEAGATE ST336607FC 0004]
Fabric Port Name: 20:20:00:60:69:e0:01:56
Permanent Port Name: 21:00:00:04:cf:e7:73:7e
Port Index: 32
Share Area: No
Device Shared in Other AD: No
N 012300; 3;2f:ff:00:06:2b:0d:12:99;2f:ff:00:06:2b:0d:12:99; na
FC4s: FCP
PortSymb: [52] "LSI7402XP-LC A.0 03-00059-01D FW:01.02.12 Port 1 "
Fabric Port Name: 20:23:00:60:69:e0:01:56
Permanent Port Name: 2f:ff:00:06:2b:0d:12:99
Port Index: 35
Share Area: No
Device Shared in Other AD: No
N 012800; 3;50:06:06:9e:00:15:63:00;50:06:06:9e:00:15:63:01; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.30 Slot/Port: 3/ge0 Logical pn: 40"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:00
Port Index: 40
Share Area: No
Device Shared in Other AD: No
N 012900; 3;50:06:06:9e:00:15:63:08;50:06:06:9e:00:15:63:09; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.31 Slot/Port: 3/ge1 Logical pn: 41"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:08
Port Index: 41
Share Area: No
Device Shared in Other AD: No
N 012a00; 3;50:06:06:9e:00:15:63:10;50:06:06:9e:00:15:63:11; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.32 Slot/Port: 3/ge2 Logical pn: 42"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:10
Port Index: 42
Share Area: No
Device Shared in Other AD: No
N 012b00; 3;50:06:06:9e:00:15:63:18;50:06:06:9e:00:15:63:19; na
FC4s: FCP

Table of Contents

Other manuals for HP A7533A - Brocade 4Gb SAN Switch Base

Related product manuals