336 Administering NPIV
0 0 id N2 Online F-Port 50:05:07:64:01:20:73:b8
1 1 id N2 Online F-Port 50:05:07:64:01:60:73:b8
2 2 id N2 Online F-Port 65 NPIV public
3 3 id N2 Online F-Port 50:05:07:64:01:e0:73:b8
4 4 id N2 Online F-Port 50:05:07:64:01:20:73:b5
...
<output truncated>
Use the portShow command to view the NPIV attributes and all the N_Port (physical and virtual) port
WWNs that are listed under portWwn of device(s) connected. The following is sample output for
the portShow command:
switch:admin> portshow 2
portName: 02
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x24b03 PRESENT ACTIVE F_PORT G_PORT NPIV LOGICAL_ONLINE LOGIN
NOELP LED ACCEPT
portType: 10.0
portState: 1Online
portPhys: 6In_Sync
portScn: 32F_Port
port generation number: 148
portId: 630200
portIfId: 43020005
portWwn: 20:02:00:05:1e:35:37:40
portWwn of device(s) connected:
c0:50:76:ff:fb:00:16:fc
c0:50:76:ff:fb:00:16:f8
...
<output truncated>
...
c0:50:76:ff:fb:00:16:80
50:05:07:64:01:a0:73:b8
Distance: normal
portSpeed: N2Gbps
Interrupts: 0 Link_failure: 16 Frjt: 0
Unknown: 0 Loss_of_sync: 422 Fbsy: 0
Lli: 294803 Loss_of_sig: 808
Proc_rqrd: 0 Protocol_err: 0
Timed_out: 0 Invalid_word: 0
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 1458
Overrun: 0 Lr_in: 15
Suspended: 0 Lr_out: 17
Parity_err: 0 Ols_in: 16
2_parity_err: 0 Ols_out: 15
CMI_bus_err: 0
Viewing virtual PID login information
Use the portLoginShow command to display the login information for the virtual PIDs of a port. The
following is sample output from the portLoginShow command:
switch:admin> portloginshow 2
To Next Page
Loading...
