EasyManuals Logo

HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Guide

HP A7533A - Brocade 4Gb SAN Switch Base
576 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Fabric OS 6.2 administrator guide 43
5. Enter a unique domain ID at the Domain prompt. Use a domain ID value from 1 through 239 for
normal operating mode (FCSW compatible):
Domain: (1..239) [1] 3
6. Respond to the remaining prompts, or press Ctrl-d to accept the other settings and exit.
7. Enter the switchEnable command to re-enable the switch.
Licensed features
Feature licenses may be part of the licensed paperpack supplied with your switch software; if not, you can
purchase licenses separately from your switch vendor, who will provide you with transaction keys to unlock
the features. License keys are provided on a per-product and per-feature basis. Each switch within a fabric
needs its own licensing.
To preserve licenses on your switch, perform a configUpload before upgrading or downgrading your
Fabric OS.
If you downgrade your Fabric OS to a version earlier than 6.2.0, some licenses associated with specific
features of Fabric OS 6.2.0 may not work.
Licences can be associated with a feature version. If a feature has a version-based license, that license is
valid only for a particular version of the feature. If you want a newer version of the feature, you must
purchase a new license.
• Version upgrade: For example, a zoning license that is for Fabric OS version 6.0.0 is added. You
can add another zoning license with a version later than 5.2.0 without removing the zoning license
for Fabric OS 5.2.0. Upgrading is allowed, but downgrading is not supported.
If a license is not version-based, it is valid for all versions of the feature.
Table 4 lists the licenses that must be installed on the local switch and any connecting switches to use the
feature.
Table 4 License requirements
Feature License Where license should be
installed
Administrative
Domains
No license required. n/a
Configuration
up/download
No license required.
Configupload or configdownload is a
command and comes with the OS on the
switch.
n/a
Diagnostic tools No license required. n/a
Distributed
Management Server
No license required. n/a
EX_Ports Integrated Routing Local switch.
Extended Fabrics Extended Fabrics Local switch and attached
switches.
FC Fastwrite FC-IP Services or
High Performance Extension over FCIP/FC
Local and attached switches.
FCIP FC-IP Services or
High Performance Extension over FCIP/FC
Local and attached switches.
License is needed on both sides
of tunnel.
FICON No license required. n/a
FICON-CUP FICON Management Server Local switch.
FICON Tape Read and
Write Emulation over
an FCIP Tunnel
FICON Tape
High-Performance Extension over FCIP/FC
license
Local and attached switches.

Table of Contents

Other manuals for HP A7533A - Brocade 4Gb SAN Switch Base

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A7533A - Brocade 4Gb SAN Switch Base and is the answer not in the manual?

HP A7533A - Brocade 4Gb SAN Switch Base Specifications

General IconGeneral
BrandHP
ModelA7533A - Brocade 4Gb SAN Switch Base
CategorySwitch
LanguageEnglish

Related product manuals