EasyManua.ls Logo

HP A7533A - Brocade 4Gb SAN Switch Base - Page 101

HP A7533A - Brocade 4Gb SAN Switch Base
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fabric OS 5.x administrator guide 101
3. Issue the uRouteShow command to display unicast routing information.
For the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch
2/32, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, and SAN Switch 4/32, use the
following syntax:
urouteshow [portnumber][, domainnumber]
For the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director: Use the following syntax:
urouteshow [slot/][portnumber][, domainnumber]
The following entries appear:
Local Domain: The domain number of the local switch.
In Ports: Port from which a frame is received.
Domain: The destination domain of the incoming frame.
Out Port: The port to which the incoming frame is forwarded in order to reach the destination
domain.
Metric: The cost of reaching the destination domain.
Hops: The maximum number of hops to reach the destination domain.
Flags: Indicates whether the route is dynamic (D) or static (S). A static route is assigned using the
uRouteConfig command.
Next (Dom, Port): The domain number and port number of the next hop.
The following example displays the routing information of all the active ports:
:
The following example displays the routing information for port 11 on slot 1:
The following example displays the routing information of port 11 to domain 4 only:
switch:admin> urouteshow
Local Domain ID: 3
In PortDomain Out Port Metric Hops Flags Next (Dom, Port)
---------------------------------------------------------------------------
0 1 11 1000 1 D 1,0
11 2 0 1500 2 D 4,0
4 16 500 1 D 4,0
16 1 27 1000 1 D 1,1
27 2 16 1500 2 D 4,16
4 0 29 500 1 D 4,0
switch:admin> urouteshow 1/11
Local Domain ID: 3
In PortDomain Out Port Metric Hops Flags Next (Dom, Port)
-------------------------------------------------------------------------
11 2 0 1500 2 D 4,0
4 16 500 1 D 4,0
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In PortDomain Out Port Metric Hops Flags Next (Dom, Port)
-------------------------------------------------------------------------
11 4 16 500 1 D 4,0

Table of Contents

Other manuals for HP A7533A - Brocade 4Gb SAN Switch Base

Related product manuals