EasyManua.ls Logo

HP A7533A - Brocade 4Gb SAN Switch Base - Page 154

HP A7533A - Brocade 4Gb SAN Switch Base
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
154 Troubleshooting
For example:
A high number of errors relative to the frames transmitted and frames received can indicate a
marginal link (see ”Correcting marginal links” on page 159 for additional information).
A steadily increasing number of errors can indicate a problem. Track errors by sampling the port
errors every five or ten minutes.
5. Issue the portFlagsShow command and then check to see how a port has logged in and where a
login failed (if a failure occurred).
For example:
6. Issue the portLogDumpPort portid command, where portID is the port number, and then view
the device to switch communication.
sw094135:admin> porterrshow
frames enc crc too too bad enc disc link loss loss frjt fbsy
tx rx in err shrt long eof out c3 fail sync sig
=====================================================================
0: 38 75 0 0 0 0 0 0 0 9 11 0 0 0
1: 110 73 0 0 0 0 0 0 0 9 11 0 0 0
2: 0 0 0 0 0 0 0 38 0 4 0 2 0 0
3: 0 0 0 0 0 0 0 0 0 4 1 2 0 0
4: 59m 102 0 0 0 0 0 0 0 4 0 0 0 0
5: 59m 103 0 0 0 0 0 0 0 3 0 0 0 0
6: 0 0 0 0 0 0 0 21 0 3 0 0 0 0
7: 0 0 0 0 0 0 0 58 0 3 0 0 0 0
8: 81 19k 0 0 0 0 0 3.0m 0 5 43 0 0 0
9: 0 0 0 0 0 0 0 29 0 3 0 0 0 0
10: 12m 68m 0 0 0 0 0 13 43m 8 1 1 0 0
11: 30m 33m 0 0 0 0 0 0 0 8 1 1 0 0
12: 89 25k 0 0 0 0 0 2.9m 0 7 43 0 0 0
13: 0 0 0 0 0 0 0 0 0 3 0 0 0 0
14: 29m 82m 0 0 0 0 0 0 1.2m 4 1 1 0 0
15: 29m 81m 0 0 0 0 0 0 1.1m 4 1 1 0 0
sw094135:admin> portflagsshow
Port SNMP Physical Flags
-------------------------------
0: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED
1: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED
2: Offline No_Light PRESENT U_PORT LED
3: Offline No_Light PRESENT U_PORT LED
4: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED
5: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED
6: Offline No_Light PRESENT U_PORT LED
7: Offline No_Light PRESENT U_PORT LED
8: Online In_Sync PRESENT ACTIVE F_PORT L_PORT U_PORT LOGICAL_ONLINE
LOGIN NOELP LED ACCEPT
9: Offline No_Light PRESENT U_PORT LED
10: Online In_Sync PRESENT ACTIVE G_PORT U_PORT LOGIN LED
11: Online In_Sync PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN NOELP LED ACCEPT
12: Online In_Sync PRESENT ACTIVE F_PORT L_PORT U_PORT LOGICAL_ONLINE
LOGIN NOELP LED ACCEPT
13: Offline No_Module PRESENT U_PORT LED
14: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED
15: Online In_Sync PRESENT ACTIVE E_PORT G_PORT U_PORT LOGICAL_ONLINE
LOGIN LED

Table of Contents

Other manuals for HP A7533A - Brocade 4Gb SAN Switch Base

Related product manuals