HP A7533A - Brocade 4Gb SAN Switch Base - Page 66

66 Configuring standard security features
Sample modification of the options for configuring SNMP MIB traps:
The following snmpMibCapSet parameters for FA-TRAP appear in the preceding example:
• connUnitStatusChange: Indicates that the overall status of the connectivity unit has changed. Its
variables are:
• connUnitStatus: The status of the connection unit
• connUnitState: The state of the connection unit
• connUnitEventTrap: Indicates that the connectivity unit has generated an event. Its variables are:
• connUnitEventId: The internal event ID
• connUnitEventType: The type of this event
• connUnitEventObject: Used with the connUnitEventType to identify the object to which the
event refers.
• connUnitEventDescr: The description of the event.
• connUnitSensorStatusChange: Indicates that the status of the sensor associated with the
connectivity unit has changed.
• connUnitSensorStatus: The status indicated by the sensor.
• connUnitPortStatusChange: Indicates that the status of the sensor associated with the
connectivity unit has changed.
• connUnitPortStatus: Shows overall protocol status for the port.
• connUnitPortState: Shows the user-specified state of the port hardware.
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB
SW-MIB
FA-MIB
FA-TRAP
FA-MIB (yes, y, no, n): [yes]
FICON-MIB (yes, y, no, n): [no]
y
HA-MIB (yes, y, no, n): [no] y
SW-TRAP (yes, y, no, n): [no]
y
swFCPortScn (yes, y, no, n): [no]
swEventTrap (yes, y, no, n): [no]
swFabricWatchTrap (yes, y, no, n): [no]
swTrackChangesTrap (yes, y, no, n): [no]
FA-TRAP (yes, y, no, n): [yes]
connUnitStatusChange (yes, y, no, n): [no]
connUnitEventTrap (yes, y, no, n): [no]
connUnitSensorStatusChange (yes, y, no, n): [no]
connUnitPortStatusChange (yes, y, no, n): [no]
SW-EXTTRAP (yes, y, no, n): [no]
y
FICON-TRAP (yes, y, no, n): [no]
y
linkRNIDDeviceRegistration (yes, y, no, n): [no]
linkRNIDDeviceDeRegistration (yes, y, no, n): [no]
linkLIRRListenerAdded (yes, y, no, n): [no]
linkLIRRListenerRemoved (yes, y, no, n): [no]
linkRLIRFailureIncident (yes, y, no, n): [no]
HA-TRAP (yes, y, no, n): [no]
y
fruStatusChanged (yes, y, no, n): [no]
cpStatusChanged (yes, y, no, n): [no]
fruHistoryTrap (yes, y, no, n): [no]
Avoid-Duplicate-TRAP (yes, y, no, n): [no]
y
switch:admin>