Recovery. Re-create the archive.
Invalid split size
Cause. The file size given in the -split option is larger than 2147483647.
Effect. The program stops with completion code 2. No archive is created.
Recovery. Use a smaller file size and try again.
Memory allocation failure: 1
Cause. The disk is full, so PAK cannot allocate memory for file buffers.
Effect. The program stops with completion code 2. The created archive files are purged. Some files
might have been extracted.
Recovery. Delete items so that sufficient disk space is available, and submit the command.
No more files can be created
Cause. The -split option was used but more than the maximum number of files were needed. The
maximum number is determined by the length of the base name of the archive. That is, if the base
name length is 7 characters, only 10 files can be created. A similar error is generated during
UNPAKing an archive if the generated files have been renamed.
Effect. The program stops with completion code 2. The created archive files are purged.
Recovery. Use a shorter name for the archive or use a larger split size.
PROCESS_CREATE_ failed: pc-err,detail-err (program progname)
Cause. The needed BACKUP or RESTORE process could not start because of a PROCESS_CREATE_
error pc-err. detail-err is the detailed error code. progname is the program filename.
Effect. The program stops with completion code 2. No archive is created, and no files are extracted.
Recovery. If appropriate, specify a correct -backup or -restore option and resubmit the command.
Code 1,48 indicates a security violation. You might need to log on as a different user ID. For an
explanation of and possible recovery from other process creation errors, use the ERROR command
or see the Guardian Procedure Errors and Messages Manual.
PROCESS_GETINFO_ failed: Error error
Cause. The call to PROCESS_GETINFO_ failed while the process is retrieving its program file name.
error is the return value of PROCESS_GETINFO_.
Effect. The program stops with completion code 2. The created archive file is purged.
Recovery. This is an internal error. Report it to your service provider.
READUPDATEX failed: error
Cause. The call to READUPDATEX failed while reading $RECEIVE. error is the return value of
FILE_GETINFO_.
Effect. The program abends. Possibly a saveabend file is created.
Recovery. This is an internal error. Report it to your service provider.
RESTORE issued a WRITE
277
To Next Page
Loading...
Need help?
General