17
Chapter 2
Getting
Started
This chapter covers the following
topics:
Connecting to a TV•
Connecting to an amplifier or receiver•
Connecting a USB drive•
Connecting to the Internet•
Using Easy Setup•
How to Set up
Your BD Player
You can set up your BD player in 5 easy
steps:
Step 1: Connect the TV
Step 2: Connect the amplifier
Step 3: Connect other peripherals
Step 4: Connect the power
Step 5: Run Easy Setup
WARNING
Before you begin making any connections,
ensure that the BD player is turned off, and
that the power cable is disconnected from
the main outlet.
TIP
It is recommended to connect the VIDEO
OUT jack of your BD player directly to the
VIDEO IN jack of the TV. Connecting a TV
via VCR may cause viewing problems when
playing copy-protected discs.
To Next Page
Loading...