HP BD-2000 - To Upgrade Firmware Using a Data Disc

56
Additional Information
To upgrade firmware using a
data disc
1 From your computer, connect to the
Internet and visit the manufacturer’s
website.
2 Download the firmware upgrade file
(*.iso) to your computer.
3 Use a commercial software, such as
Nero™, to convert *.iso file to a disc
image.
4 Burn the converted file onto a disc.
5 Remove any inserted disc or USB drive
from the BD player. And turn off the BD
player.
6 Turn the BD player back on.
7 Insert the upgrade disc. The upgrade
screen may take some time to appear.
8 Follow the on-screen instructions to
start upgrade. If the disc does not
automatically upload update, press HOME
on the remote control. Press
to select General Setting > System >
Upgrade > Disc, then press OK. The
firmware begins upgrade.
9 Once completed, a message will appear
on screen.
WARNING
»
DO NOT TURN OFF THE POWER while
upgrading is in progress!