34
Troubleshooting Help Zone
Other Configuration Problems
Problem To try and fix this ...
POST displays an error not covered by an earlier
section in this chapter.
Check your Setup program settings:
1 Turn on or restart the PC.
2 When the message
Press F2 to Enter Setup
appears, press the
F2
key.
The PC’s configuration settings may be corrupted.
Restore the default values.
1 Switch the PC OFF then ON.
2 When the message
Press F2 to Enter Setup
appears, press the
F2
key.
3 Press
F9
to restore default values.
4 Press
F10
to exit the Setup program saving changes.
You may need to update your PC’s Basic Input
Output System (BIOS).
Create a floppy to update your PC’s BIOS. Refer to page 20.
You think you may have a problem with the audio
or LAN features.
Download the latest drivers from HP Support Web:
www.hp.com/go/briosupport
Your hard disk may be fragmented or contain
errors.
Check the state of your hard disk by running ScanDisk and Disk
Defragmenter. To access these utilities, select
Programs
Accessories
System Tools
from the
Start
menu. For more
hard disk troubleshooting, refer to page 36.
To Next Page
Loading...
