ReadyBoost Card
A ReadyBoost card is installed in the computer. The card is secured to the chassis, and a cable connects
the card to the system board.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 107).
2. Remove the access panel (
Computer Access Panel on page 113).
3. Unplug the ReadyBoost cable from the system board, and then lift the card assembly from the
chassis.
To install the ReadyBoost card, reverse the removal procedure.
144 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
To Next Page
Loading...
