ReadyBoost Card
A ReadyBoost card is installed in the computer. The card is secured to the chassis, and a cable connects
the card to the system board.
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 159).
2. Remove the computer access panel (
Computer Access Panel on page 163).
3. Unplug the ReadyBoost cable from the system board, and then lift the card assembly from the
chassis.
To install the ReadyBoost card, reverse the removal procedure.
180 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
To Next Page
Loading...
