HP Compaq Elite 8300 Touch All-in-One Business User Manual

3. Remove the two Torx screws that secure the webcam module bracket to the computer.
Figure 7-37 Removing the webcam module
4. Rotate the assembly to gain access to the connector on the module, and then disconnect the cable
from the module.
Figure 7-38 Disconnecting the webcam module cable
68 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis

HP Compaq Elite 8300 Touch All-in-One Business Specifications

General

Brand	HP
Model	Compaq Elite 8300 Touch All-in-One Business
Category	Monitor
Language	English