-dev "Ultrium_dagnja" -devaddr Tape4:1:0:1C -devtype 13
-devpolicy 1 -mahost dagnja.company.com
with something like:
-dev "Ultrium_kerala" -devaddr /dev/nst0 -devtype 13
-devpolicy 10 -devioctl /dev/sg1 -physloc " 2 -1" -storname
"AutoLdr_kerala" -mahost kerala.company.com.
The procedure on using the edited SRD file for disaster recovery is different for each
disaster recovery method. Specific details are explained in the sections pertaining
to disaster recovery methods.
IMPORTANT:
You should restrict access to the SRD files due to security reasons.
AMDR/ASR
Perform the following before proceeding with the normal AMDR/ASR recovery
procedure:
1. Open the recovery.srd file (located on the first drsetup / ASR diskette) in
a text editor and make the necessary changes.
2. Save the file to its original location in Unicode (UTF-16) format.
EADR/OBDR
Perform the following additional steps before proceeding with the normal EADR/OBDR
recovery procedure:
Disaster recovery for Windows110
To Next Page
Loading...
Need help?
General