all nodes•
• administrative virtual server (defined by the administrator)
• if Data Protector is configured as a cluster aware application, Cell Manager
virtual server and IDB.
See “Restoring the Microsoft Cluster Server specifics” on page 96 for details.
After you performed the backup, merge the P1S files for all nodes in the MSCS, so
that P1S file of each node contains information on the shared cluster volumes
configuration. Refer to “Merging P1S files of all nodes for EADR” on page 100 for
instructions.
The DR ISO image file
Data required for temporary DR OS installation and configuration (DR image) is
packed in a single large file and stored on the backup medium and optionally on
the Cell Manager during a full client backup. If you want to save the full disaster
recovery image file to the Cell Manager for all clients in the backup specification,
perform the following steps:
1. In the Context List, select Backup.
2. In the Scoping pane, expand the Backup Specifications and then Filesystem.
3. Select the backup specification you will use for a full client backup. If you have
not created it yet, do so. For details, see the online Help index: “creating, backup
specifications”.
4. In the Results Area, click Options.
5. Under Filesystem Options, click Advanced.
6. Click WinFS Options and select Copy full DR image to disk.
7. If data residing on Windows Vista or Windows Server 2008 systems will be
backed up, select also Detect NTFS hardlinks and Use Shadow Copy, and clear
Allow Fallback.
Disaster recovery for Windows60
To Next Page
Loading...
Need help?
General