HP DL370 - ProLiant - G6 Performance - Remove the DVD-ROM Drive; Remove the Hard Drive Cage Blank

Operations 28
Remove the DVD-ROM drive
1. Power down the server (on page 22).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 22).
o Extend the server from the rack (on page 24).
3. Remove the access panel (on page 25).
4. Remove the air baffle (on page 26).
5. Remove the fan cage (on page 26).
6. Disconnect and remove the DVD-ROM drive data/power cable.
7. Remove the DVD-ROM drive.
Remove the hard drive cage blank
1. Power down the server (on page 22).
2. Do one of the following:
o Open or remove the tower bezel, as needed ("Open or remove the tower bezel" on page 22).
o Extend the server from the rack (on page 24).
3. Remove the access panel (on page 25).
4. Remove the air baffle (on page 26).
5. Remove the fan cage (on page 26).