HP Dragonfly Folio User Manual

4. Remove the speakers from the computer (4).
To install the bottom speakers, reverse this procedure.
NOTE: When installing the speakers, be sure rubber washers are installed in the screw holes in the
speakers.
Transfer board
To remove the transfer board, use this procedure and illustration.
Table 5-9
Transfer board description and part number
Description Spare part number
Transfer board N22942-001
Transfer board cable (available in Cable Kit) N22929-001
Before removing the transfer board, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 33).
2. Remove the bottom cover (see Bottom cover on page 33).
3. Remove the battery (see Battery on page 42).
4. Remove the bottom speakers (see Bottom speakers on page 44).
Remove the transfer board:
1. Disconnect the keyboard cable from the transfer board (1).
2. Disconnect the system board cable from the transfer board (2).
3. Disconnect the touchpad cable from the transfer board (3).
4. Disconnect the backlight cable from the transfer board (4).
Transfer board
45

HP Dragonfly Folio Specifications

General

Graphics	Intel Iris Xe Graphics
Processor	12th Gen Intel Core i5 or i7
RAM	16 GB or 32 GB LPDDR5
Storage	512 GB, 1 TB, or 2 TB PCIe NVMe SSD
Operating System	Windows 11 Pro
Wireless	Intel Wi-Fi 6E AX211 (2x2) and Bluetooth 5.2
Ports	1 x Headphone/microphone combo
Audio	quad speakers
Security	Fingerprint reader, TPM 2.0
Weight	Starting at 2.99 lb (1.35 kg)