Table 3-4 Computer Setup—Security (continued)
USB Security Allows you to set Enabled/Disabled (default is Enabled) for:
● Front USB Ports
◦ USB Port 1
◦ USB Port 2
◦
USB Port 3
◦
USB Port 4
●
Rear USB Ports
◦
USB Port 8
◦ USB Port 9
◦
USB Port 10
◦
USB Port 11
● Internal USB Ports
◦
USB Port 0
◦
USB Port 5 (some models)
Slot Security Allows you to disable anyPCI Express or MiniCard slot. Default is enabled.
Network Boot Enables/disables the computer’s ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
System IDs Allows you to view:
● Product Name
● Serial number
● Universal Unique Identifier (UUID) number. The UUID can only be updated if the current
chassis serial number is invalid. (These ID numbers are normally set in the factory and are
used to uniquely identify the system.)
●
SKU Number
●
Family Name
● Asset tag (18-byte identifier), a property identification number assigned by the company to
the computer.
● Feature Byte
● Build ID
● Keyboard locale setting for System ID entry
12 Chapter 3 Computer Setup (F10) Utility
To Next Page
Loading...
