System Fan
Description Spare part number
Fan 657103-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 46).
2. Remove the access panel (
Access Panel on page 47).
3. Lay the computer on its side with the rear facing toward you.
4. Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan
forward, and then remove the fan from the chassis.
Figure 7-41 Removing the fan
NOTE: System board appearance may vary.
86 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
To Next Page
Loading...
