Table 5-4 WLAN module descriptions and part numbers (continued)
Description Spare part number
Intel AX211 Wi-Fi 6e + Bluetooth 5.2 M.2 2230 vPro 160 MHz CNVi WW WLAN module M53362-001
IMPORTANT: To prevent an unresponsive system, replace the wireless module only with a wireless
module authorized for use in the computer by the governmental agency that regulates wireless
devices in your country or region. If you replace the module and then receive a warning message,
remove the module to restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 38).
2. Remove the bottom cover (see Bottom cover on page 38).
3. Disconnect the battery cable from the system board (see Battery on page 40).
Remove the WLAN module:
1. Carefully disconnect the WLAN module antenna cables (1) from the WLAN module.
NOTE: Computer models have either one or two WLAN module antennas. On models with two
antennas, the #1 white WLAN module antenna cable connects to the WLAN module #1 Main
terminal. The #2 black WLAN module antenna cable connects to the WLAN module #1 Aux terminal.
2. Remove the Phillips M2.0 × 2.5 screw (2), and then remove the WLAN module (3).
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
