3. Remove the microSD card blank insert (1) from the microSD card slot.
4. Remove the connector board (2) from the computer.
To install the connector board, reverse this procedure.
Fan
To remove the fan, use this procedure and illustration.
Table 5-10
Fan descriptions and part numbers
Description Spare part number
Fan (includes cable and captive screws)
For use with computer models equipped with a 28 W processor N09036-001
For use with computer models equipped with an 18 W processor N09035-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 38).
2. Remove the bottom cover (see Bottom cover on page 38).
3. Disconnect the battery cable from the system board (see Battery on page 40).
Remove the fan:
Fan
53
To Next Page
Loading...
