3. Detach the touchpad cable (3) from the computer. The touchpad cable is attached to the top cover/
keyboard with double-sided adhesive.
To install the touchpad cable, reverse this procedure.
Touchpad
To remove the touchpad, use this procedure and illustration.
NOTE: The touchpad spare part kit includes touchpad.
Table 5-16
Touchpad descriptions and part numbers
Description Spare part number
Touchpad with NFC module antenna N15436-001
Touchpad without NFC module antenna N09033-001
NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is included in the Cable Kit, spare
part number N09040-001.
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 38).
2. Remove the bottom cover (see Bottom cover on page 38).
3. Remove the battery (see Battery on page 40).
4. Remove the NFC module cable (see NFC module cable on page 63).
5. Remove the touchpad cable (see Touchpad cable on page 65).
Remove the touchpad:
66
Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
