HP ENVY 16 - Battery Removal and Replacement

Remove the bottom cover:
1. Remove the ve Phillips M2.0 × 9.0 screws that secure the bottom cover to the computer.
2. Use a nonmarking, nonconductive tool to release the edges of the bottom cover from the computer (1).
3. Rotate the bottom cover forward (2), and then remove the bottom cover from the computer (3).
To replace the bottom cover, reverse the removal procedures.
Battery
To remove the battery, use this procedure and illustration.
Table 5-2
Battery description and part number
Description Spare part number
Battery (6 cell, 83 Whr, 3.59 Ah) M48025-005
WARNING! To avoid personal injury and damage to the product:
34
Chapter 5Removal and replacement procedures for authorized service provider parts