HP ENVY 16 - Keyboard with Top Cover Replacement

3. Remove the touchpad from the computer (4).
Reverse this procedure to install the touchpad.
RJ-45 door
To remove the RJ-45 door, use this procedure and illustration.
Table 5-15
RJ-45 door description and part number
Description Spare part number
For 60 W models N13385-001
For 80 W models N13386-001
Before removing theRJ-45 door, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 33).
2. Remove the bottom cover Bottom cover on page 33(see ).
3. Remove the battery (see Battery on page 34).
4. Remove the heat sink (Heat sink on page 40).
5. Remove the fans (see Fan assembly on page 41).
6. Remove the display assembly panel (see Display assembly panel on page 43).
7. Remove the system board (see System board on page 44).
Remove the RJ-45 door:
1. From the inside of the computer, insert a at tool under the RJ-45 door (1).
52
Chapter 5Removal and replacement procedures for authorized service provider parts